Valid to UK only - excludes oversized items
Using a back-to-back gauge for your model railway ensures that the wheels on your rolling stock are spaced correctly...
A poly-cap is a type of plastic cap often used in model-making kits, especially for assembling figurines or model...
Graham Farish is a name you’re likely to come across if you're interested in British model railways, especially in...
Semaphore signals, those distinctive mechanical arms that once graced railway lines across the UK, were largely...
Kato track is a popular choice in the world of model railways, known for its quality, ease of use and versatility. If...
Click here to receive the tips weekly in your mailbox. You can unsubscribe at any time.
Hornby's curved platform sections feature on many home layouts, and although there are arguably more realistic looking platforms available, they do serve a valuable purpose on a lot of layouts that are more focused on the fun aspect. But as they...
Adding real smoke to your model locomotive can significantly enhance its appearance, but is it easy to do?Well, that depends on the amount of space you have to play with inside your bodyshell! When fitting anything inside a model locomotive, space...
To model a freight train prototypically, one must first know how long the prototype is, but that information is difficult to come by as there is no set length.That statement may not be helpful for modellers looking for a definitive answer, but...
The toothpaste technique is very similar to the hairspray chipping technique and achieves roughly the same effects.The principle is to apply a basecoat that will eventually be seen through the finished topcoat to replicate damage or wear. The...
Brake vans (originally called break vans) were first employed on early industrial tramways and cableways to provide braking should coupling fail. They were needed because early wagons didn't have brakes of their own. These types of wagons are...
Vacuum pipes can be seen on the front and rear of many older railway locomotives and rolling stock. They are usually located either on or around the buffer beam and are used to provide a 'through' vacuum to operate the train's braking system....
Most model railways struggle to accommodate full-sized passenger trains, to do so would require huge platforms and therefore a huge baseboard, and that's a luxury most of us don't have. So how long (or in this case short) can a passenger train be...
As a modeller, but not necessarily an electrician, you may have read many 'how to' articles advising the use of a reed switch, but also wondered what they are and what they do.The quickest way to understand a reed switch is to forget about the...
Ballast inlays are sponge strips designed for placement under model railway track to cushion it whilst replicating ballast.Inlay for straight and curved track sections is typically supplied on a roll but specific sections are required for...
Traditional model railway locomotives transfer power from track to motor via wires. However, a split chassis locomotive works in a different way.A traditional model railway locomotive picks up its power from the track through its metal wheels....
The tightest N gauge Setrack curve presently produced by Peco is a first radius curve (228 mm radius).Getting to know your curves is an important part of planning a model railway, however, the jargon used to describe many track sections can...
Deciding where to place signals on a model railway layout can be extremely confusing as there are many rules to adhere to. Because of this, the mere layman has little or no chance of getting it right the first time, and in the absence of a...