Valid to UK only - excludes oversized items
Adding realistic tyre tracks to muddy terrain in your scale model can enhance the scene’s authenticity and tell a...
When modelling fog in a railway scene, you’ll want to create a convincing sense of mist rolling over the tracks,...
Keeping your model trains running smoothly requires regular maintenance, and lubrication is a key part of that....
Waterslide transfers are a key component of scale modelling, allowing you to add intricate markings, insignias and...
The Firefly Class was a series of broad-gauge steam locomotives built for the Great Western Railway (GWR) between...
Click here to receive the tips weekly in your mailbox. You can unsubscribe at any time.
Bear in mind that Sundeala is designed to be used as a pinboard or notice board. As Sundeala is not actually a wood and is made from recycled paper, it is not the best thing to be making the base board for your railway layout. There are several...
There is of course the old tried and tested method, the track rubber which does the job, no railway modeller should be without one. But there are also other products out there which take the strain for cleaning large sections of track. Dapol for...
Select the area where you want the scatter, then apply a layer of PVA glue, sprinkle your grass covering the glue. When the glue is set, simply remove the excess scatter that has not been glued. You can use a small vacuum cleaner or if it is on...
You can make hills in a variety of ways. The tried and tested way is with chicken wire and papier mache. This is a good method as there is very little weight to the finished hill. If you just want a hill in the middle of your layout, I would...
The most common wood for baseboards is probably chipboard as this is relatively inexpensive. Plywood is another alternative but is slightly more expensive. Stay clear of MDF as it absorbs moisture and needs to be sealed. MDF is also difficult to...
Create your scene as you would do normally and add some snow. You can get trees that have snow already on them or you can make your own by adding a small amount of PVA glue to the foliage and some white powdered pigment this will create a great...
Static grass is a scatter made of nylon fibres, that can be made to stand on end giving the appearance of real grass. Static grass is best applied using a static grass applicator. By filling the applicator with grass fibres, they are...
Static grass is best applied using a static grass applicator. There are several on the market and they can apply grass up to 12mm depending on which applicator you choose. Please note some will only allow you to use up to 6mm static grass while...
If you do not want to buy pre-made trees, which these days look very realistic, you can get tree armatures which are basically the trunk and branches. They come in various sizes from ¾ of an inch up to 7 inches (from 2cm to about 17cm). Simply...
How you attach trees really depends on the type of trees you are using. Many trees have wire forming the body of the tree/trunk very similar to a bottle brush, which allows for the trunk to be sunk directly into the scenery. Simply push them down...
Trees come in all shapes and sizes, some you can stand under and not be able to reach the bottom branch, some bottom branches will slap you in the face, so there is no specific one size fits all. The next time you go out, take a look at all the...
How long is a piece of string? This is a question that comes up time and again. I always say look at nature for the answer: in real life, trees can be as tall as your house or smaller than your shed. There is no right or wrong, some trees can be...