A backscene is an essential component of a model railway layout, providing a visual backdrop that enhances realism...
No products
Dual Gauge point NG Diverging H0/H0e (00/009) Left
Electric switch machine for all points.
Telephone Box Plastic Model Kit: need to be assembled, glued and painted. Height: 55mm Pack of two
HO Lamborghini Gallardo White
'Etna' Vertical boiler locomotive Based on Alexander Chaplin & Co. of Glasgow products. Fits on Hornby 'Southern' Industrial Tank mechanism R2264.
A white wooden fence of split wood with a total length of 160 cm.
Rail Joiners Nickel silver G45
HO 1972 VW T2 Camper Van Yellow
Saddle tank partner to 'Columbine'Dimensions: L 104 x W 45 x H 80The kit requires a Hornby 'Smokey Joe' chassis to complete
A simple kit of fifteen casting makes this pretty locomotive. It is designed to fit easily onto the Hornby 'Smokey Joe' chassis with the minimum of modification. A little estate railway locomotive - the kit is complete with all the 'bits' required to finish it. Dimensions: L 104 x W 45 x H 80 The kit requires a Hornby 'Smokey Joe' chassis to complete.
The kit comes complete with Dapol wheelsets and rear lamp castings. The base is loaded with lead shot for increased stability. L.128mm W. 57mm [over roof] H. 180mm
Tender Locomotive Kit designed to fit on the 'Smokey Joe' Mechanism.Specifications and dimensions are similar to that of 'Nellie' above, except for the addition of a tender. A proud Septimus Spokeshave is in attendance. Length 218mm, Width 46mm, Height 190mm.
7mm Narrow Gauge locomotive body kit to run on 00 gauge (16.5mm) track.The kit is designed to fit onto the Hornby 'Smokey Joe' chassis or similar with the minimum of modification.Dimensions 95mm long x 45mm wide x 68mm highThe kit has brass reinforcing in the footplate to aid ridigity and is complete with brass whistle, safety valves, hand rail knobs and...
The 'Oysterbeach Special' Coach Kit is complete with Dapol wheelsets, deep button upholstered seating and oil lamp. It includes extra chassis weight for increased stability for its' height.Dimensions: L95 x W68 x H210mmKit complete with 00 wheelsets
Open Knife Edge Coach with Canopy.Comes with a Dapol 40mm wheelbase chassis.
'Pierrot' makes a model in 1/2 inch to 1 foot scale (1:24) of a small version of the Hunslet 'Alice' class locomotives suitable for running with other Gn15 models. The kit is designed to fit onto the 'standard' outside cylinder Hornby chassis known generally as 'Smokey Joe'. 110mm long x 48mm wide x 78mm high from rail level
The kit makes a model of a vertical boiler narrow gauge locomotive in the style of the late cartoonist Rowland Emett and is designed to run on 00/H0 track. The kit is complete except for glue and paint and the parts are vacuum cast in polyurethane resin to a very high standard. The model requires a Hornby basic 'Smokey Joe' 0-4-0 chassis to...
People Seen At Station (120)
Skiers - Pack Two
Parts to Convert the 'G' Scale Bachmann 'THOMAS' into a Real Locomotive.
The kit is complete except for paint, transfers and glue. The main body parts are cast in Polyurethane resin and the kit is designed to fit either the Hornby 'Bill' or 'Ben' chassis with no modification or the 'Smokey Joe' chassis with minor modification.L 145, W 46, H 185 mm
Saddle tank based on the products of the Peckett & Co of Bristol.The kit is designed to fit on the Hornby 'Smokey Joe chassis with the minimum of modification .Dimensions: 95mm long x 46mm wide x 68mm highLocomotive kits have brass reinforcing wire cast into the foot plate to aid rigidity.All kits are cast in Urethane resin and are complete except for...
Kit comes complete with Dapol wheel sets and NEM couplings.
This kit is suitable for running behind 'Columbine'.Inside bearing 'v' skip waggon - Dimensions: 60-38-4650 degree included angle skip, lead loaded chassis, Dapol couplings and spoked wheel sets.
This kit is suitable for running behind 'Columbine'.Inside bearing chaldron waggon - Dimensions: 60-40-42Complete with lead loaded chassis, Dapol couplings and spoked wheel sets.
This kit is suitable for running behind 'Columbine'.Inside Bearing Barrel Waggon - Dimensions: 60-32-51Complete with lead loaded chassis, Dapol couplings and spoked wheel sets.
Hendre Quarry Inside bearing Side Tipping WaggonComplete with lead loaded chassis, Dapol couplings and spoked wheel sets.Dimensions: 60-36-36
Compact 7mm Narrow Gauge Skip Body mounted on a lead loaded Sand Hutton chassis for added weight. Suitable for scales up to Gn15. The body actually tips. 57mm long x 38mm wide x 45mm high.
Inside Bearing Tub Waggon complete with Dapol wheel sets and NEM couplings.Size: L60 x W37 x H40mm.
This kit is suitable for running behind 'Columbine'.A load for the Machinery Flat Waggon - Dimensions: 80-30-45
This kit is suitable for running behind 'Columbine'.A load for the Machinery Flat Waggon.Dimensions: 65-30-31
Brandy Wine Barrel Waggon KitA private owner waggon of 'The Blackgang Smugglers Co-operative Co. Ltd.'. The base is loaded with lead shot for increased stability and is complete.Dimensions: 128L x 47W x 68H mmKit complete with 00 wheel sets.
Drop Side 3 Plank Open WaggonLead loaded chassis for increased stability and hinged drop doors and are held closed with pins and chains, 'just like the real thing'.Dimensions: 128L x 47W x 85H mm.Kit complete with 00 wheel sets.
Parts to Convert the 'G' Scale Bachmann 'PERCY' into a Real Locomotive
Freelance 4 Wheel Brake Van Moulded plastic parts that require gluing together. Painting and finishing will be also required.This kit includes the wheels but no couplings. The most suitable couplings to use are GR-103 coupling pockets with GR-102 couplers (to be attached to the kit using plastic glue)
Snailbeach District Coal Wagon Moulded plastic parts that require gluing together. Painting and finishing will be also required.This kit includes the wheels but no couplings. The most suitable couplings to use are GR-103 coupling pockets with GR-102 couplers (to be attached to the kit using plastic glue)
McDonalds Restaurant with drive-through With interior, 4 sunshades, 2 banners and mast with McDonald`s logo. Dimensions: L 17,6 x W 15,8 x H 9,8 cm.
Code 100 Permanent Magnet "between-the-rails" Delayed Uncoupler
20 Series Coupler Medium (9/32'') Centreset Shank (2pairs) Designed for either Talgo (truck) or body mounting.
NEM-362 Long Coupler - 10.76 mm (27/64")
HO Lamborghini Gallardo Black
HO Mini Cooper S Cabrio Red
Businessmen (O Scale)
Porsche Cayenne Turbo fire brigade red
4 Wheel Flat Wagon (2) Freelance in design, these models are typical of the type seen on many narrow gauge railways around the world.
Square Chimney smoke generator
72 Unpainted Sitting Figures with BenchesUnpainted plastic figures