Plastic Weld from EMA is an indispensable adhesive for scale modellers and hobbyists working with plastic kits. Its...
No products
8x N Platform sides
HO/TT/N Different steps + door, antenna and other building accessories
4 Cobblestones accessory sheets (HO) Particularly effective in conjunction with platform sides. With vertical and horizontal interlock for infinite combinations.4 pieces Each 105 x 200 mm
The set contains 8 electrical relay boxes and 16 manual turnout levers (activators). Plastic kit that requires some basic assembly and painting.
HO Cable ducts control boxes For electrical lines. Many cables had to be accommodated near the signal tower; slim ducts were sufficient at greater distance.The cover provided protection. When cables needed repair or maintenance, the cover was removed.Each 5 control boxesCable ducts width 3 mm, 8 mmTotal length each 670 mm
Set contains six signal point indicators (three left and three right), six grates and dummy mechanisms. The models come painted ready for use but some assembly is required. Static models only (non-operational).
A pack of trunking for signalling and trackside dioramas. Pack contains 1380 mm of unpainted trunking.
12 Telegraph poles Highly detailed, delicate telegraph poles are an essential trackside feature. Painting the insulators white and the crossbeams black makes them even more realistic. Poles with supports are provided for curves, with two supports for added safety.6 pieces without supports6 pieces with supportsHeight 73 mm6 pieces supports separate
Construction site accessories Useful details for layout construction sites - site hut cement mixers, wheelbarrow, tar cooker, miscellaneous tools, fence, ladders, warning signs, etc. Also includes a builder s truck. HO gauge 1:87 scale (00 gauge compatible)
Scale Ruler for HO gauge Our ruler is an essential tool for every exact scale modelling task. Centimetre and model metre gradations. 30 cm
Scale Ruler for N Gauge Our ruler is an essential tool for exact scale modelling task. Centimetre and model metre gradations. 30 cm
Workshop equipment Use this accessory set to furnish workshop areas, such as in industrial buildings, with realistic-looking equipment. Workbenches with movable drawers and vices as well as cabinets with doors that can be mounted open or closed are complemented by two compressors with accessories and fire extinguishers. Euro pallets are included for...
Set of 6 workbenches with tools on bench Each 23 x 9 x 10 mm
Small Vehicle WorkshopMeasurements - 153 x 64 x 67 mm Plastic kit requiring assembly Suitable for realistic portrayal of car garage, service centre, MOT station or tyre and exhaust centre H0 gauge (00 gauge compatible) Additional features such as garage tools ramps etc included
Plastic kit of 8x TT scale benches.
Cork track underlay for turnouts The natural material dampens wheel noise and can be ballasted. For two turnouts.1 sheet 200 x 300 x 4 mm
Set of 10x plastic Pylons. Ready-to-plant models that are pre-coloured for convenience. Each post measures approximately 82mm tall.
Road signs 780 traffic signs, signposts, town signs + 70 posts and bases
Platform open An extension for platform No. 13 221.When using track with built-in trackbed, compensate for the extra height with the base.Distance between track centres 91 mm4 sections Each 75 x 55 x 10 mm
Heavy-duty shelving and pallets The expandable industrial shelving can be built in different variants. The shelves can be added as needed. The 24 Euro pallets in two versions and 4 metal boxes can be used to complete the design of your layout.Shelf with 9 stands and 30 shelves. 136 x 12 x 44 mm
Set of rope pull holders and pressing wheel boxes. This set contains 10 rope pull holders and 2 pressing wheel boxes in HO gauge (OO gauge compatible). Single moulded plastic models that only require painting.
Brick walls with optional decoration red Finally it s possible to build your own brick structures. Exactly-sized cross units for infinite walls. With 3 different interlocking friezes or decorative panels.2 pieces Each 210 x 65 mm
N Track inserts For road-crossings and level-crossings, at freight depots and industrial facilities. Also as freight items.10 pieces Each 41 x 7 mm
Ballast mat mixed 35 x 50 cm Use them to create track beds quickly and easily. Durable backing paper with scatter material. Easy to cut with scissors or a knife. Also suitable for creating landscapes.
Ballast mat 35 x 50 cm Use them to create track beds quickly and easily. Durable backing paper with scatter material. Easy to cut with scissors or a knife. Also suitable for creating landscapes.
Ballast mat fine 35 x 50 cm Use them to create track beds quickly and easily. Durable backing paper with scatter material. Easy to cut with scissors or a knife. Also suitable for creating landscapes.
Grey Rock Mat 35 x 50 cm Crepe paper. Easily to cut with knife and scissors. The rock effect is achieved by crumpling the mat.
OO/HO 24 foot planks and 12 covers Each 90 x 12 mm
Privacy fence with posts
Waste bins with accessories
Wall planks natural colour
Cement fibre roofing mat
Brick wall card sheet 220 x 100 mm
Irregular cut stone wall